Glass Cutter For Thick Glass Left-Handed Window Glass Cutter or Glass Tile Cutting Tool With Glass Cutting Tool Oil The Amazing Glass Cutter Tool Beginner Or Pro UK Made For Cutting Glass Sheet 1-21mm

THE AMAZING TILE AND GLASS CUTTER Is a manual Tile Cutter that allows you to cut straight, radius and wavy lines in tile and glass products such as ceramic tiles, glass, mirror and floor tiles. The reason the cutter works so well despite what people think is not down to the cutting wheel being very sharp, in actual fact the cutter is probably the dullest tool you will ever own, but it is probably the hardest, this super hardness of the cutter blade along with the optimized angle ground into the edge of the scoring wheel allows The Amazing Tile And Glass Cutter tool to cut a variety of thicknesses’ of materials such as wall tiles, Subway Tile, Floor Tile, Glass Tile, Most Porcelain Tiles, Mosaic Tile and even Quarry Tile pavers Up To 3/4" Thick if instructions are followed closely. The Secrets to using The Amazing Tile And Glass Cutter successfully are to follow the instructions carefully. Practice on a spare tile to work out the correct pressure, usually not enough pressure is applied to start but occasionally it can cut better with less pressure especially on glass. Cutting on the floor for example instead of on a solid table at waist height will prevent even pressure being applied along the score line. Not oiling the cutting wheel and checking the cutting wheel is turning freely prior to scoring will cause the cutting wheel to bind, drag and even lock up across the surface instead of evenly scoring the surface. Holding the Cutter by the plastic grips when scoring with your strongest hand means that you are only applying minimal pressure if any on the cutting wheel at the point where the scoring is happening. Whether Cutting Stained Glass, Plate Glass, Picture Framing Glass or Fused Glass the cutting wheel should be oiled every single score, the oil will run down onto the glass and will not only cool down the glass and give a cleaner cut this will also extend the life of the cutting wheel. When you score glass if you can wipe the oil off the surface and there is no score line visible – you need to increase the pressure – make sure you are holding close to the wheel and use the 2 handed method if needed especially if you do not have a lot of strength in your hands or are cutting a very hard material. Secret for cutting thin strips of glass: The gap between the aluminum breaker and the bottom side of the jaws that holds the cutting wheel can be made smaller simply by folding the breaker forward and twisting / pivoting it forward on the rivet, this can be stiff to start with when the tool is new, and it can be glued in this position if you only cut thin glass all the time. Glass sheets for crafts can be Cut From 1/16" To 3/8" Thick and upto 8ft long can be cut and even thicker Glass Can Be Cut Using Techniques Included In The Detailed Instructions. Available in Red Black and Pink and also left handed – See somebody cares.

• GLASS CUTTER REPLACEMENT WHEELS - The Easy To Remove Glass Cutting Wheels Last A Long Time And Are Always Available In Our Store. A Simple Nut To Remove The Wheel And Spare Parts Are Always Available. Can Be Purchased As A Bundle So You Can Keep One With Your Stained Glass Supplies.
• HOW TO CUT STRAIGHT LINES - Oil The Glass Cutting Wheel Make Sure You Do Not Hold The Glass Cutter Tool By The Grips And Use The Flat Side Of The Glass Cutting Blade To Run Up Along A Thick Very Smooth Steel Guide Or Straight Edge Like A Speed Square. Place The Glass Or Mirror Sheets On A Board At Waist Height So You Can Score The Glass And Operate The Tool Like A Professional Glass Cutter.
• HOW TO USE GLASS CUTTER FOR THICK GLASS - And Thin Glass Like Stained Glass , Run The Glass Scoring Wheel Up And Down A Board Of Wood After Soaking It In Oil, This Ensures The Glass Cutter Scoring Wheel Is Turning Freely So It Can Cut Thick Mirror Or Thin Glass Evenly Across The Surface Of The Glass Sheets. This Is Also The Same Technique To Use The Glass Cutter For Windows Window Pane Mirror And Mosaic Glass Tile
• HOW TO CUT GLASS TILE - With The Starter Glass Cutter Kit, Normally Glass Tile Mosaic Tile On A Sheet Are Difficult To Cut With A Wet Tile Saw As They Chip The Edges Of The Glass Tile, The Amazing Glass Cutter Is A Great Glass Tile Cutter , Glass Tiles Can Be Scored All At Once While On A Sheet But Must Be Broken One At A Time. All Glass Tile Are Different So Practice With The Glass Cutter For Mosaic Is Essential, Start Cutting Glass Tile With Very Firm Pressure All Across The Surface And Gradually Lighten The Pressure To Get To A Stage Where You Are Scoring Firm Enough To Leave A Score Line But Not So Hard It Chips The Glass.
• STAINED GLASS CUTTER - Holding The Glass Cutter As Per Instructions And Not By The Handles Allows You To Use The Glass Cutter For Stained Glass And Thin Glass Remember Always Pull The Glass Cutter Towards You When Scoring, Score Firmly All The Way Across The Glass, You Can Draw A Line And Follow It Or Use A Template By Looking At The Back Of The Wheel While Scoring Firmly Along The Surface Of The Glass Mirror Or Mirror Tile. After A Little Practice I Guarantee This Will one of your Favorite Glass Cutters Tools of all your Stained Glass Tools.
• Available in different Colors Red, Black, Pink. Also Available in Right Handed and Left Handed Made in UK Great Britain Unconditional Lifetime Warranty You Break it - We Replace it!!!!